October 3, 2022
home-remodeling

home-remodeling

Every home remodeling project should take into account protecting the floor. Without the proper covering, you may end up turning your remodeling project into a repair project for your newly damaged floor. The best way to avoid this is to cover your floor adequately during a remodel.

Top Tips for Floor Protection

Don’t turn your DIY renovation into an even bigger project. By properly preparing your floor before you start your remodeling project, you’ll be able to ensure that your carpet, tile, wood, or cement floor is taken care of. Wondering how to protect floors during construction? Read on for five tips to help keep your floor safe.

1. Plastic Film to Protect Carpets

When looking at the wide range of temporary floor protection equipments, plastic films are a simple solution for carpeted floors. While carpet is rather susceptible to the debris from a remodeling project, it is rather easy to protect with a plastic protection film. This film works like saran wrap that clings to your carpet as you lay it down. This film will protect your floor from the debris of your next project.

2. Use a Paper Cover

A roll of rosin paper or craft paper is a popular choice when it comes to construction protection products. Spread this paper across a hard floor, taping it down with masking tape or painter’s tape. With a paper cover, you’ll be able to easily protect your floor from debris that comes with a renovation. For projects that involve paint and other liquids, used a reinforced paper with a moisture barrier to ensure that nothing spills onto the floor underneath it.

3. Try Ram board for Extra Protection

When working on projects where you need serious protection for your floor, ram board is the solution. Made with recycled fibers, ram board is a particularly heavy duty and reusable. If you are curing your new floor, ram board will allow vapors to pass through the covering without allowing any pressure on top of the board to damage the floor below.

4. Have a Fragile Floor? Use Corrugated Plastic

Another choice for heavy-duty protection is corrugated plastic. This covering is perfect for more delicate floors like marble, tile, or a wood floor that is unfinished. The main danger to such a fragile floor during a remodel is that it can easily become damaged during the process. During a renovation, it is common for workers to accidentally drop tools and other equipment on the floor. With corrugated plastic, you’ll know that your fragile floor is still safe.

5. Use Sticky Mats to Keep Dust Away

Sticky mats are an easy way to keep your floor free of any dust or debris you may track through the house during your remodeling. Place your sticky mats near each doorway to make sure your shoes are dirt free after you walk inside.

Remodeling is already a major undertaking, don’t add anything else to your plate by failing to cover your floors. Use these five ideas and checkout this wide range of temporary floor protection equipments to help you decide on the best protective solution for your floors. With the right floor protection during construction, your floor will be perfectly untouched by the time your remodel is finished.

Leave a Reply

Your email address will not be published.